Watch Dog Wipe Out Porous Graffiti Remover is manufactured by Dumond Chemicals. Dumond are widely recognized as market leaders in regards producing effective, environmentally safe, easy-to-use solutions to a range of professional, marine, industrial and household jobs.
There are a lot of graffiti removing products on the market, it can be confusing determining which product will work best for you. We stock Watch Dog Wipe Out Porous Graffiti Remover because it is one of the quickest, easiest and most effective products available.
With no aromatic or chlorinated solvents included, this product is environmentally friendly, poses no risk to the user, and is biodegradable. It is specially formulated to be fast and effective in removing the most difficult and stubborn graffiti from brick, concrete and other porous surfaces, while not damaging the original surface.
Before applying Watch Dog Graffiti Remover to any surface always do a small test area. Although every effort has been made to test the product on as many surfaces as possible, it is always recommended to test the surface you will be treating.
Application is very straightforward, all you need to do it brush, roll or spray directly onto the graffiti and let it stand for a approximately 10-15 minutes. Use either a pressure washer or a nylon scrub brush to agitate the product on the surface. Be sure to completely remove all the remnants of the product from the surface after the paint has been removed.
If you require any professional advice concerning this product and its uses, please give our sales team a call.
Product Description & Use: Watch Dog™ Wipe Out Porous Graffiti Remover Is specifically formulated for use on previously unpainted porous surfaces. Watch Dog™ Wipe Out Porous Graffiti Remover works well on spray paint, marker, pen, ink, crayon, shoe polish, lipstick, and most other graffiti marks and stains.
Features & Benefits:
Non-Drip Gel Formulation
Single Application, Easy Removal of Existing Graffiti
Effective on Most Porous Surfaces
Limitations: Not recommended for use on aluminum, Plexiglas, fiberglass, plastics, brownstone, limestone, sandstone, plywood, or drywall. Not recommended to be used on previously painted or stained surfaces. Not recommended for use in temperatures below 40° degree Fahrenheit. Always do a test patch prior to full removal.
Test Patch: Always perform a small inconspicuous test area on each type of substrate and paint coating prior to full application. Testing before beginning any project is the best way to ensure product effectiveness. Test patches can determine the proper dwell time and thickness to apply the product for you specific application. Failure to do a test patch can result in need for more than one application, increasing labor and material costs.
Recommended Substrates: Before applying to the entire substrate always do a test patch. Recommended for use on concrete, cement, stucco, brick, bare wood, and asphalt surfaces that are previously unpainted or stained. Regulatory Information: VOC compliance - Watch Dog™ Wipe Out Porous Graffiti Remover meets all national, state and local regulations.
Preparation: Make sure surface is clean, dry and free from any debris.
Surface and Air Temperatures: To avoid product from freezing and reducing effectiveness do not use below 35° degrees Fahrenheit. For best results, use product in temperatures above 50° degrees Fahrenheit and below 90° degrees Fahrenheit. Product effectiveness is increased in warmer temperatures.
Application & Spread Rate: Apply product liberally, at full strength using a brush or roller. Allow product to remain on surface for 30 minutes or more based on your test patch results. Product may require some agitation with a nylon bristled brush. Watch Dog™ Wipe Out Porous Graffiti Remover provides an average spread rate of approximately 100-150 sq. ft. per. Gallon. Results may vary based on the substrate texture and porosity.
Spray Application: Not recommended to be airless sprayed.
Removal & Clean Up: Power wash or rinse product from the surface with a garden hose. When power washing substrate use lower pressures, 1000 psi or less, as to not damage your surface. Dispose of water and waste according to federal, state and local regulations.
Always test each type of surface and coating for efficacy, dwell times may vary.
Do not let product dwell over 30 min.
Do not let the product dry on the surface.
Watch Dog™ Wipe Out Porous Graffiti Remover may darken woods and require neutralization with our Citri-Lize™.
Health & Safety Requirements: Not for internal consumption. While Watch Dog™ Wipe Out Porous Graffiti Remover is formulated to be safe for the user, surface and environment, proper safety procedures should be followed at all times when handling this product. Read the full label and MSDS for precautionary instructions before use.