There are a lot of graffiti removing products on the market, it can be confusing determining which product will work best for you. We stock Watch Dog CPU Graffiti Remover because it is one of the quickest, easiest and most effective products available.
With no aromatic or chlorinated solvents included, this product is environmentally friendly, poses no risk to the user, and is 100% biodegradable. It is specially formulated to be fast and effective in removing the most difficult and stubborn graffiti, while not damaging the original surface.
Before applying Watch Dog Graffiti Remover to any surface always do a small test area. Although every effort has been made to test the product on as many surfaces as possible, it is always recommended to test the surface you will be treating.
Application is very straightforward, all you need to do it spray directly onto the graffiti and let it stand for a couple of minutes. Then wipe off with a cloth, you will see the graffiti dissolving and cleaning off immediately.
For stubborn marks that do not remove after one application, repeat this process and use a nylon scrubbing brush. Different surfaces and paint types may react differently to the product, but the end result will be the same - the graffiti will be removed.
Some of the surfaces this product is known to have treated include:
Roll-up Security Doors
It can also be used to remove gum, glues and most adhesive residue making it a very versatile product.
General Application: Spray directly onto the graffiti, and leave on for several minutes. Brush area with a nylon scrub brush. In most cases graffiti will start to dissolve immediately. In some cases it may be necessary to re-apply and re-scrub. A SINGLE APPLICATION WILL REMOVE MOST GRAFFITI
Aerosol Graffiti Remover Your product worked great! We used it on our vinyl siding after it was tagged. Thanks to your product our house is back to normal. Nancy G., Illinois
Product Description & Use: Watch Dog™ All Purpose Remover is biodegradable, non-toxic, non-flammable and has a low odor. Watch Dog™ All Purpose Remover is a mild but effective remover that can be used on a variety of different impervious substrates to remove permanent marker, lipstick, adhesives, and pen.
Features & Benefits:
Limitations: Not recommended for use on porous, previously stained or painted surfaces. Always do a test patch prior to full removal.
Test Patch: Always perform a small inconspicuous test area on each type of substrate and coating prior to full application. Testing before beginning any project is the best way to ensure product effectiveness. Test patches can determine the proper dwell time and thickness to apply the product for you specific application. Failure to do a test patch can result in need for more than one application, increasing labor and material costs.
Recommended Substrates: Recommended for use on cured impervious sufaces; such as filing cabinets, lockers, bathroom stalls etc. Watch Dog™ All Purpose Remover can also be used on no porous unpainted surfaces. Always do a test patch prior to full removal.
Regulatory Information: VOC compliance - Watch Dog™ All Purpose Remover meets national, state and local regulations.
Preparation: Make sure surface is clean, dry and free from any debris.
Surface and Air Temperatures: To avoid product from freezing and reducing effectiveness do not use below 35° degrees Fahrenheit. For best results, use product in temperatures above 50° degrees Fahrenheit and below 90° degrees Fahrenheit. Product effectiveness is increased in warmer temperatures.
Application & Spread Rate: Apply product liberally, at full strength using trigger spray bottle. Allow product to remain on surface for 1-2 min. or more based on your test patch results. Product may require some agitation with a nylon bristled brush or Scotch™ Brite pad. Re-Apply if necessary. Watch Dog™ All Purpose Remover provides an average spread rate of approximately 6-8 sq. ft. per. 22 ounces container; results may vary based on the substrate texture and porosity.
Spray Application: Product is sold in a 22 oz. trigger spray bottle. To spray larger quantities use a pump up garden sprayer.
Removal & Clean Up: Rinse product from the surface with water and a rag, sponge or garden hose. The surface may need to be degreased with our Safe n’ Easy™ Oil and Grease Remover if a residue is present after cleaning. Dispose of water and waste according to federal, state and local regulations.
Follow up with our Safe n’ Easy™ Oil and Grease Remover or glass cleaner if residue is left over after use
Re-application or agitation may be required depending on contaminates
Health & Safety Requirements: Not for internal consumption. While Watch Dog™ All Purpose Remover is formulated to be safe for the user, surface and environment, proper safety procedures should be followed at all times when handling this product. Read the full label and MSDS for precautionary instructions before use.