Welcome to PaintRemover.com

Not sure what to order?

(800) 315-0204

free-shipping

Smart Strip Biodegradable Aerosol Paint Stripper

Smart Strip Biodegradable Aerosol Paint Stripper

Product Name Price Qty
Smart Strip Biodegradable Aerosol Paint Stripper

$15.19

$15.99

Smart Strip Biodegradable Aerosol Paint Stripper - 6 Pack

$91.14

$95.94

Item No: 827-3312-G

Paint Remover For:   

  • Newer Paint (Less Than 30 Years Old)
  • ›Acrylic Paint
  • ›Chlorinated Rubbers
  • ›Latex Paint
  • ›Oil Based Paint
  • ›Shellac
  • ›Stain
  • ›Urethane 
  • ›Water Based Paint

Call Us

Smart Strip is manufactured by Dumond Chemicals. Dumond are widely recognized as market leaders in regards producing effective, environmentally safe, easy-to-use solutions to a range of professional, marine, industrial and household jobs.

Smart Strip is one of the best paint strippers for the environment, it is water-based, zero VOC and 100% biodegradable, and almost completely odor free. It will not burn when coming into contact with skin either.

Smart Strip will strip away up to 15 layers of acrylic paint from almost all surfaces, including hardwoods, softwoods, cherry wood, cements, brick, ceramic tiles, all metals, drywall, exterior surfaces, fiberglass, formica, furniture, granite, graphite, interiors, plaster, porcelain, vinyl and much more!

Before applying Smart Strip Aerosol Paint Stripper to any surface always do a small test area. Although every effort has been made to test the product on as many surfaces as possible, it is always recommended to test the surface you will be treating.

Application is very easy, just simply spray the area to be stripped. The aerosol makes it easy to reach those hard to get places, quick to cover large areas, and easy to treat vertical surfaces.

If you require any professional advice concerning this product and its uses, please give our sales team a call.
USE ON: Works on almost all surfaces, wood, brick, concrete, plaster, steel, iron, fiberglass, etc. Easily adheres to vertical or overhang surface. Can be used on interior and exterior surfaces. EASY TO APPLY: Limitations: For best results, surface temperatures should be 60ºF – 95ºF. Product can be applied as low as 37ºF, however, efficiency/effectiveness are reduced and dwell time increases. Test Patch: Always prepare a test area on each type of surface and paint coating prior to full application. Testing before beginning the project is the best way to ensure product suitability. This will also determine the proper thickness of the remover and the dwell time required for project completion. Preparation: Mask/protect areas where stripping is not desired, including adjoining surfaces where overspray may travel. Polyethylene (plastic sheets) and masking tape create an effective barrier. Plants and other foliage should be covered or rinsed thoroughly before and during application. NOTE: SMART STRIP™ will not affect glass, aluminum, or plastic surfaces. Application & Spread Rate: Using brush, roller or airless spray, apply approximately 1/6” to 1/8” thick (refer to test patch results) according to the age, number of layers, and type of coating being removed. SMART STRIP™ provides an average spread rate of 45 - 50 sq. ft. per gallon; results may vary. Removal: Remove softened/lifted paint using a scraper, taping knife, squeegee or power washer. Agitate tough to remove residue with a stiff nylon brush or scouring pad, paying particular attention to crevices, grooves and cracks. Exterior stripped surfaces should be rinsed thoroughly with a power washer. Interior surfaces can be rinsed using a spray bottle or pail, a sponge and water, or denatured alcohol to remove remaining residue. Clean Up: Collect remover, paste and paint residue in plastic bags and dispose of in compliance with local government regulations. Do not collect or store removed paint/paste waste in metal containers. Clean up airless sprayer by running water or denatured alcohol through the equipment soon after application has been completed. Allow surface to dry thoroughly before repainting. Accelerate the Paint Removal Process with our EXCLUSIVE technologically advanced fibrous Paint Removal Paper <a href="pa99.html">Click Here</a> For Details

Your Guide Will Be Downloaded Shortly

Q. Does Smart Strip™ really work on all surfaces?
A.
ABSOLUTELY! Smart Strip™ works on virtually ALL interior and exterior surfaces including all sorts of wood, brick, metal, concrete, stone, plaster, fiberglass, steel, iron etc. There is nothing like Smart Strip --- we believe it is the most versitile paint remover available.

Q. Does Smart Strip™ work quickly?
A. In most instances Smart Strip™ Paint Remover will remove up to 15 coats of stubborn paint in one single application. Incredible results and so easy to use. Starts to work in minutes to remove muliple layers of stubborn old paint.

Q. What kind of paints will Smart Strip™ remove?
A. Removes ALL Oil and Latex Paints. Even on Brick! Removes virtually ALL Paint, Epoxies, Urethanes, Elastomerics, Chlorinated Rubbers etc. Smart Strip™ works on almost any paint imagineable!

Q. Is Smart Strip™ safe for the environment?
A. YES, Smart Strip™ is water based, odor free and 100% Biodegradable. Best of al Smart Strip™ does not contain methylene chloride, caustic, or toxic chemicals and wil NOT BURN YOUR HANDS.

Q. Will Smart Strip™ work on detailed intricate surfaces?
A. YES , Smart Strip™ Paint Remover can be used on the most intricate detailed and carved surfaces. How to remove paint from moldings, picture frames, old doors, book cases, etc ?? Smart Strip is your best choice.

Q. Can Smart Strip be used to remove lead based paint?
A. No Problem! , Smart Strip™ is exceptional for lead-based paint removal. Smart Strip Loves Old Lead Paint.

Q. Will Smart Strip™ remove paint from dry wall?
A. Smart Strip™ paint remover is extremely effective to remove paint from dry wall. First do a "test patch" to determine how much time Smart Strip™ should remain on the painted dry wall. Generally, less than two hours should be sufficient. You do not want leave it too long and possible remove the paper portion of the dry wall. Go slowly and if necessary re-apply Smart StripTM. You will amazed with the results.

Q. What about furniture paint removal?
A. Smart Strip™ is one of the FINEST FURNITURE PAINT REMOVERS we have ever seen. Works on new furniture and antiques. Works on all types of wood(including oak, walnut, mahogany cherry etc). Removes paint, stains, varnishes, and all sorts of architectural coatings.

Q. Will Smart Strip™ remove marine paint? Will it damage the gel coat?
A. Smart Strip™ is great for the removal of marine coatings and will not damage the gel coat. For really tough marine paints with over 10 coats of paint use Peel Away&reg; Marine Safety Strip Paint Remover.

Q. How do you apply the Smart StripTM?
A. It is easily applied by brush, roller, or conventional airless sprayers. It easily adheres to all vertical or overhanging surfaces

Q. How long does the Smart Strip™ need to stay on the surface and how do I remove it?
A. Dwell time will vary depending on the type of coating, number of layers, and temperature. For best results, allow paste to dwell overnight or longer. Remove the softened/lifted paint using a scraper, taping knife, or power washer. The stripped surface should then be rinsed with water or denatured alcohol to remove any remaining residue. Allow the surface to dry thoroughly before repainting.

Q. Can Smart Strip™ be used in any temperature?
A. For best results, surface temperatures should be 60 degrees F - 95 degrees F. Smart Strip™ . Can be applied as low as 37 degrees. However, the effectiveness may be reduced and the dwell time may increase.

Q. Does Smart Strip™ require the use of the Peel Away paper?
A. No, Smart Strip™ does not require the use of the Peel Away Paper. The paper can be used with it if you like. It can make clean up easier in many instances when you are working indoors or if you are working overhead. The Peel Away™ Paper will also accelerate the paint removal process. The paper can be purchased separately with no additional shipping costs. To purchase Peel Away Paper click here.

Q. Do I really need to do test patches before I start?
A. Yes, Always prepare a test area on each type of surface and paint coating prior to full application. This will determine the proper thickness of the remover and the dwell time required for project completion.

Q. How do I remove Smart Strip™ from rougher surfaces like brick, concrete or stone?
A. SMART STRIP WORKS GREAT ON TOUGH SURFACES LIKE BRICK, CONCRETE, STONE AND MARBLE. For rougher surfaces, if possible, a power washer is the best way to remove Smart Strip. If not, interior surfaces can be rinsed using a spray bottle of clean water and a nylon bristle scrub brush . After a thorough scrub, spray again with water to remove any remaining residue.
I love the new Peel Away® Smart Strip™. We worked with other paint removers in the past and nothing comes close to the effectiveness of this product. We used it in our bathroom to remove paint from our tile floor. It worked great! We also used it on our cupboard doors in our kitchen. Again it did not have any problem removing the paint right down to the wood. Thank you for providing us with such an easy to use effective paint remover. I bought a 100 year old house a couple of years ago. It was a rental for 20 + years and it needed some love to say the least. There was years of paint build up on the simple colonial trim. It was improperly applied latex over oil. It was coming off in places and in places so thick that you could not see detail on the trim. I knew the house had hardwood floors when we looked at it but they were covered with carpet. Before we moved in, I removed the carpet and to my dismay there underneath was what I believe to be at least 30 year old carpet backing and glue. I had to remove the carpet as it smelled of the pets that previously lived there but I could not refinish my floors immediately. I remembered your products from watching This Old House as a child with my parents. I am only 35 right now. I found your site and looked at all you had to offer. We bought a gallon and began to try it out on our built in china closet as it was the most detailed piece we had in the house. We also purchased the Peel Away paper . The Smart Strip smelled nice and was easy to apply. The paper worked wonders and allowed us to have a life while the product did it's job. Thanks for making great easy to use products that produce fantastic results! -Sincerely, Christina

Product Description & Use: Smart Strip™ is an environmentally responsible paint remover that is pH neutral and safe for the user. Smart Strip™ is water-based and extremely effective for removing multiple layers of oil-based, latex, acrylic, varnishes and urethanes from virtually all interior and exterior surfaces. (IE. Wood, brick, metal, concrete, stone, plaster and most fiberglass’s) Smart Strip™ is excellent for intricate, carved or molded surfaces. Because it is a paste, it is easily applied with a brush, roller, or conventional airless sprayer. Smart Strip™ is formulated to remain wet and effective over extended periods and does not require the use of Dumond® Laminated Paper. Dwell times will vary depending on the type of coatings, number of layers and temperature. Always preform a test patch to determine exact dwell time and proper thickness to apply this product. To use, apply to substrate with a brush, roller or sprayer according to test patch results. Once Smart Strip™ is ready to be removed use either a scraper, squeegee or power washer to strip substrate. Be sure to scrub remaining residue with nylon brush and water. Use Peel Away™ After Strip for stubborn remaining residue. Allow Substrate to dry thoroughly before repainting.

Features & Benefits:

Formulated without methylene chloride 

Will not burn skin 

Removes up to 15 layers of latex of acrylic coatings in a single application 

Environmentally responsible: water based 

Virtually no odor 

Zero VOC 

pH neutral – No neutralization necessary

Limitations: May not be suited for the removal of some epoxies, lead-based paints and primers as well as some high performance coatings. Smart Strip™ may damage or discolor some types of glass, plexiglass, plastics, vinyl or rubbers. Always test Smart Strip™ in a small inconspicuous are before applying to your entire substrate.

Test Patch: Always perform a test patch in a small inconspicuous area on each type of substrate and paint coating prior to full application. Testing before beginning any project is the best way to ensure product effectiveness. Test patches can determine the proper dwell time 03/2014 and thickness to apply the product for you specific application. Failure to do a test patch can result in the need for more than one application, increasing labor and material costs.

Recommended Substrates: Smart Strip™ can be used on most substrates, however is not recommended for the following: Drywall, EIFS, plywood and laminates, Plexiglass, some fiberglass and plastics.

Regulatory Information: Smart Strip™ is VOC compliant with all national, state and local regulations.

Preparation: Be sure that the surface is clean, dry and dull before beginning your project. Protect and cover all areas such as vegetation and other surfaces not designated to be stripped including adjoining surfaces where overspray and rinse water may travel. Solvent resistant polyethylene sheets can be used as an effective barrier. Wet down all vegetation before beginning and cover with Dumond® Catch-N-Cover™ or 6 mil solvent resistant polyethylene sheeting. Be careful not to lay sheeting on vegetation in the sun or it may result in killing the foliage.

Surface and Air Temperatures: For best results, use product in temperatures above 50° degrees and below 90° degrees Fahrenheit. To avoid product freezing and reducing effectiveness do not use below 35° degrees. Product effectiveness is increased in warmer temperatures and greatly decreased below 50° degrees Fahrenheit.

Application & Spread Rate: Dumond® always recommends working in smaller manageable areas when stripping unless you are working with a large number of people. Using a trowel, brush, roller or sprayer apply paste no less than a 1/8” according to test patch results. For a 24 hour dwell time ¼ inch is recommended. When applying onto irregular surfaces use a nylon brush to force paste into intricate areas. Product can dwell between 3-24 hours if necessary. Smart Strip™ provides an average spread rate of approximately 40-50 Sq. Ft. per gallon; results may vary based on substrate texture and porosity. 

Spray Application: Dumond® recommends that Smart Strip™ be sprayed with an airless paint sprayer. The sprayer pump size should be at least ¾ gallon per minute and all gun and manifold filters should be removed prior to spraying. Hose size should be a new 1/4” ID however a 3/8” ID hose will reduce strain on the sprayer. It is always recommended to use a new hose on the job, as old paint in the lines will dislodge and cause clogs during application. Keep a clean bucket of water available, as an occasional flush of the pump may be necessary on hot days to alleviate clogs and the pumps inability to build up pressure. Do not leave Smart Strip™ in the sprayer or spray lines 03/2014 overnight. Flush the sprayer and hose thoroughly each day and upon completion with warm water and dish detergent.

Removal & Clean Up: Once Smart Strip™ is ready to be removed use a pressure washer or scraper (preferably plastic). After all paste has been removed, immediately use a nylon brush and clean water to scrub residue off the substrate, paying particular attention to crevices, grooves and cracks. Rinse thoroughly with water to remove all remaining residue. For optimal results, low pressure washing is recommended for final rinse when working outside. Dispose of paper, paste remover and dissolved coatings according to federal, state and local regulations. If you are having difficulty removing the residue after stripping use the Peel Away® After Strip and a nylon scrub brush to remove.

Best Practices:

Always test each type of surface and paint coating for suitability, dwell times, and thickness. 

Let Smart Strip™ dwell at least 6 hours before removing.

Never apply Smart Strip™ and leave it for 24 hours without checking on it if product dries or hardens to surface, apply a thin coat of Smart Strip™ on hardened area and wait 30 minutes to 1 hour and remove. 

Health & Safety Requirements: Not for internal consumption. While Smart Strip™ is formulated to be safe for the user, surface and environment, proper safety procedures should be followed at all times when handling this product. Read the full label and MSDS for precautionary instructions before use.

Save over $69 now on our environmentally friendly paint remover package including Peel Away 7 1-Gallon and Smart Strip 1-Gallon for only $129.99 and you'll see great results! PEEL AWAY® 7 is an environmentally safe paint remover used to remove oil and latex paint. Works well when removing paint from wood to be kept it's natural color after stripping. Should be used in all situations where you are looking to keep the wood in its natural form.

Smart Strip™ by Peel Away® removes 15 LAYERS OF PAINT IN ONE SINGLE APPLICATION. It is a unique paint remover that is 100% biodegradable, safe for the user, the surfaces to be stripped and the environment. Smart Strip™ by Peel Away® is very effective for removing multiple layers of paint, industrial coatings and architectural finishes from virtually all interior and exterior surfaces. Works wonders on painted brick, all kinds of wood products, metals, stone, plaster, concrete, fiberglass and much more! Great for Acrylic Paint, Latex Paint, Lead Based Paint, Oil Based Paint, Shellac, Stains, Urethane and Water Based Paints. Order Now and Save!