Welcome to PaintRemover.com

Not sure what to order?

(800) 315-0204


Peel Away Marine Strip Kit

Peel Away Marine Strip Kit

Product Name Price Qty
Peel Away Marine Strip - 1.25 Gallon Kit



Peel Away Marine Strip - 5 Gallon Kit



Peel Away Marine Strip - 10 Gallon Kit (2/5-Gallon Kits)



Peel Away Marine Strip - 20 Gallon Kit (4/5-Gallon Kits)



Product May Require Special Handling

Item No: 104-M105-G

Call Us

PEEL AWAY Marine Safety Strip is a marine paint remover that is designed to be safer to the user than other brands. It is safer because it does not contain some of the harmful chemicals that other products use, such as methylene chloride and caustic. This means there are no harmful fumes emitted making it safer to use in enclosed spaces, or for prolonged periods. Also, if any product comes in contact with your skin it will not burn or cause irritation.

When developing PEEL AWAY Marine Safety Strip, Dumond wanted to provide a product that had high biodegradability and a low rate of evaporation. This makes for a very environmentally safe product, as a result of this you will notice this product taking longer than other aggressive paint removers.

As with all paint removal products perform a small test area on the surface you will be stripping. It is often impossible to know the condition and type of surface before the paint is removed.

Some of the features of PEEL AWAY Marine Safety Strip paint remover:

One application can remove 30+ coats of paint

This is a very environmentally safe product, it does not generate any hazardous or flammable fumes

Easily clings onto vertical or overhanging surfaces

Affordably priced with discounts for bulk purchases

Can be applied by roller, brush or sprayed

Particularly effective in removing marine paint, varnishes and graffiti from wood, metal and fiberglass surfaces

Dumond produce a wide range of environmentally friendly, heavy-duty paint removing products. Whether you are looking for the best paint remover, need lead-based paint remover or any other paint removing solution, Dumond have a product to meet your needs.

Dumond have been a market leader in the paint, coating, and the paint removing industry for years and continue to develop new products.

Your Guide Will Be Downloaded Shortly

Product Description & Use: Peel Away® Marine Strip Heavy Duty Removal Kit is an environmentally responsible method for removing organic or lead based paint from most substrates. The Peel Away® Marine Strip Heavy Duty Removal Kit includes paste remover, application tool, pH test kit, Dumond® Laminated Paper, and Citri-Lize™ neutralizer. After doing a proper test patch, Peel Away® Marine Strip paste remover is spread or sprayed on the substrate being stripped. The Peel Away® Marine Strip is then covered with the Dumond® Laminated Paper (printed side out) making sure all air pockets are smoothed out. Dumond® Laminated Paper is used to limit evaporation and is left on until all the paint or coating is emulsified by Peel Away® Marine Strip paste. When removing it is critical that you do not rely on the tension between the paper and paste to pull away the paste/paint. Remove by sliding carefully a spatula or taping knife under the edges of paste easing both the paste and paper off together. The stripped substrate is then washed with clean water and once thoroughly dried, neutralized with Citri-Lize™ neutralizer included in the kit and then tested for pH.

Features & Benefits:

Formulated without methylene Chloride 

Does not generate hazardous fumes 

Non-toxic, non-carcinogenic, and non-flammable 

Zero VOC 

Controls lead-dust dispersal

Limitations: Not recommended for use on veneer, plywood, drywall, aluminum, brownstone, sandstone, limestone, fiberglass, glass laminates, Plexiglass, plastics, rubber and EIFS. Peel Away® Marine Strip will darken hardwoods. Not recommended for the removal of epoxies, urethanes, chlorinated rubber, cementitious paints, baked finishes and other high-performance coatings. Always do a test patch prior to full removal.

Test Patch: Always perform a small inconspicuous test area on each type of substrate and paint coating prior to full application. Testing before beginning any project is the best way to ensure product effectiveness. Test patches can determine the proper dwell time and thickness to apply the product for you specific application. Failure to do a test patch can result in need for more than one application, increasing labor and material costs. 03/2014

Recommended Substrates: Before applying to the entire substrate always do a test patch. Recommended for use on wood, concrete, cement, stone, stucco, plaster, cast iron, steel, marble, terra cotta, granite, terrazzo, copper, tiles, enamel, clapboard and slate.

Regulatory Information: VOC compliance - Peel Away® Marine Strip meets national, state and local regulations.

Preparation: Prepare surface by scraping or pressure washing to remove all loose or peeling coatings. Allow substrate to dry before applying Peel Away® Marine Strip. Protect and cover all areas, vegetation and surfaces not designated to be stripped including adjoining surfaces where overspray may travel. Solvent resistant polyethylene sheets can be used as an effective barrier. Wet down all vegetation and cover with Dumond® Catch-N-Cover™ or 6 mil solvent resistant polyethylene sheets.

Surface and Air Temperatures: To avoid product from freezing and reducing effectiveness do not use below 35° degrees Fahrenheit. For best results, use product in temperatures above 50° degrees Fahrenheit and below 90° degrees Fahrenheit. Product effectiveness is increased in warmer temperatures.

Application & Spread Rate: Dumond® Chemicals always recommends working in smaller manageable areas when striping unless you are working with a large number of people, only strip what you can rinse before the remover dries, usually a 4’ X 4’ area. Using a trowel apply paste according to test patch results. For 48 hour dwell time ¼ inch is recommended. When applying onto irregular surfaces use nylon brush to force paste into intricate areas. Cover all paste with Dumond® Laminated Paper while being careful to smooth out all air pockets. Product can dwell 12-48 hours if necessary. Peel Away® 1 provides an average spread rate of approximately 20 Sq. Ft. per gallon; results may vary based on substrate texture and porosity. 

Spray Application: Dumond® Chemicals recommends that Peel Away® Marine Strip be sprayed with a large texture sprayer. Pump size should be at least ¾ gallon per min. All filters and manifolds should be removed prior to spraying. Hose size 25’ X 1”. Nozzle, trigger texture gun with a 10 fluid nozzle with medium disk. Use high fluid pressure and high pressure at the gun. Keep a clean bucket of water available, as an occasional flush of the pump may be necessary on hot days to alleviate clogs and the pumps inability to build up pressure. Do not leave Peel Away® Marine Strip in sprayer or spray lines overnight. Flush sprayer and hose thoroughly each day and upon completion with warm water.

Removal & Clean Up: Remove by inserting trowel, spatula, or other paint scrapping tool underneath paste and lift Dumond® Laminated Paper while scrapping. After all paste has been removed use a nylon brush and clean water to scrub residue off the substrate, paying particular 03/2014 attention to crevices, grooves, and cracks. Rinse thoroughly with water to remove all remaining residue. For optimal results, low pressure washing is recommended for final rinse when working outside. Remember, only strip what you can rinse before the remover dries, usually a 4’ X 4’ area. Dispose of paper, paste remover and dissolved coatings according to federal, state and local regulations. For best results, wait at least 24-48 hours before neutralizing.

Waste Disposal: When lead-based paint coatings are being removed from a substrate, disposal of the resulting waste is regulated by the United States Environmental Protection Agency (EPA) and many state and local agencies. Federal standards for classification, handling and disposal of potentially hazardous wastes are detailed in EPA’s Resource Conservation and Recovery Act (RCRA) of 1976. Additional, more stringent regulations may be imposed by state and local regulatory authorities.

Neutralization: Use Citri-Lize™ Neutralizer (included in kit) for neutralization process. Dumond® Chemicals recommends waiting 24-48 hours before neutralizing porous surfaces. Neutralizing is required when re-painting or re-staining after paint removal. Failure to properly clean and neutralize the surface as directed may result in alkaline residue that may cause hazing and/or subsequent coating failure. Citri-Lize™ Neutralizer can be applied at any point after paint removal, however is most effective when applied to a dry substrate. Follow directions for water ratio on the back of the Citri-Lize™ bag and use plastic sprayer to thoroughly coat entire substrate. Allow substrate to dry and test with PH test strips, repainting can occur when PH range is between 5 and 8 and the moisture content is below 12%.

Re-Painting Wooden Surfaces: For best results on wooden surfaces use a moisture meter before re-painting. Re-Painting can occur at readings of 12% moisture or below. Dumond® Chemicals recommends the use of a premium 100% acrylic stain blocking primer on all wooden surfaces to minimize moisture problems including peeling. Cedar, redwood and cypress woods have a tendency to bleed resin and/or tannic acids. Extra drying time may be required before painting these surfaces (up to as much as 60 days in some cases) otherwise staining may occur. If this occurs, spot prime those areas with an alkyd based stain killing primer. Ask your paint supplier for a premium primer that retards and seals in extractive bleeding and discoloration.

Best Practices:

Always test each type of surface and paint coating for efficacy, dwell times and thickness. Let the Peel Away® Marine Strip dwell at least 12 hours before removing. 

Never apply Peel Away® Marine Strip and leave it for 24-48 hours without checking on it 

If product dries or hardens to the surface, remove the Dumond® Laminated Paper and apply a thin coat of Peel Away® Marine Strip on hardened area, reapply Dumond® Laminated Paper and wait 30 minutes to 1 hour and remove.

Use straight white vinegar as a substitute for Citri-Lize™ neutralizer 

Use butchers paper or freezer paper as a substitute for Dumond® Laminated Paper 

Wood bleach can be used on wooden surfaces (after Citri-Lize™ Neutralizer has been apply) to lighten substrate

Health & Safety Requirements: Not for internal consumption. While Marine Strip™ is formulated to be safe for the user, surface and environment, proper safety procedures should be followed at all times when handling this product. Read the full label and MSDS for precautionary instructions before use. 24-Hour Emergency Information: 1-800-535-5053 North America or 1-325-323-3500 International

Save over $69 now on our environmentally friendly paint remover package including Peel Away 7 1-Gallon and Smart Strip 1-Gallon for only $129.99 and you'll see great results! PEEL AWAY® 7 is an environmentally safe paint remover used to remove oil and latex paint. Works well when removing paint from wood to be kept it's natural color after stripping. Should be used in all situations where you are looking to keep the wood in its natural form.

Smart Strip™ by Peel Away® removes 15 LAYERS OF PAINT IN ONE SINGLE APPLICATION. It is a unique paint remover that is 100% biodegradable, safe for the user, the surfaces to be stripped and the environment. Smart Strip™ by Peel Away® is very effective for removing multiple layers of paint, industrial coatings and architectural finishes from virtually all interior and exterior surfaces. Works wonders on painted brick, all kinds of wood products, metals, stone, plaster, concrete, fiberglass and much more! Great for Acrylic Paint, Latex Paint, Lead Based Paint, Oil Based Paint, Shellac, Stains, Urethane and Water Based Paints. Order Now and Save!