Welcome to PaintRemover.com

Not sure what to order?

(800) 315-0204

free-shipping

Peel Away 5 Soy-Based Paint Remover 5Gal Pkg

Peel Away 5 Soy-Based Paint Remover 5Gal Pkg

5 Gallons
$233.99 $433.99 You Save $200 (46%)

Item No: 104-5005
UPC: 27691050058

Paint Remover For:   

  • Carpet Adhesive
  • ›Epoxies 
  • ›Floor Coatings
  • ›Glues 
  • ›Industrial Coating
  • ›Marine Coating
  • ›Mastic
  • ›Polyurethane  
  • ›Urethane

Call Us

The Complete Paint Removal Test Patch Kit is manufactured by Dumond Chemicals. Dumond are widely recognized as market leaders in regards producing effective, environmentally safe, easy-to-use solutions to a range of professional, marine, industrial and household jobs.

Peel Away 5 Soy-Based Paint Remover is specially designed for the eco-friendly minded. Biodegradable and non-toxic, Peel Away 5 removes high-strength, chemically-resistant floor coatings while being kind to the environment. The gel formula can be applied by brush, squeegee or airless sprayer. After the directed time the coatings can be removed by pressure washing, or long handled scrapers.

Some of the features of Peel Away 5 Soy-Based Paint Remover:

Heavy Duty gel formula is excellent as removing most high-performance floor coatings

Removes carpet glues, latex and acrylic mastics

One of the best paint removing products on the market for furniture/industrial dripping tank processes

Does not include methylene chloride, caustics, highly flammable solvents.

Before applying Peel Away 5 Soy-Based Paint Remover to any surface always do a small test area. Although every effort has been made to test the product on as many surfaces as possible, it is always recommended to test the surface you will be treating.

If you require any professional advice concerning this product and its uses, please give our sales team a call.
Peel Away® 5 is an environmentally safe paint remover used for the removal of high strength chemically resistant floor coatings. Such as epoxies, urethanes, etc. It is a gel product applied by a squeegee, brush or sprayer and removed by a long handled scraper or by power washing. Average coverage is 60-70 sq ft. It is also good for the removal of carpet adhesive, tan latex and brown acrylic mastic, industrial floor coatings on wood and concrete. After product has dissolved, it is them ready to be removed, dispose of within your local ordinance.

Your Guide Will Be Downloaded Shortly

Product Description & Use: Peel Away® 5 Soy Based Remover is an environmentally safer soy based coatings remover that has been specifically formulated to remove high strength, chemically resistant floor coatings. Peel Away® 5 Soy Based Remover can also be used in dipping tank removal processes. This product is gel-like and can be applied by squeegee, brush, or roller. When ready Peel Away® 5 Soy Based Remover can be scraped or power washed from the surface easily.

Features & Benefits:

Soy based gel formulation

Works well with dipping tanks

Formulated without methylene chloride

Non-caustic

Limitations: Do not use if pregnant. Not recommended for use on drywall, plywood, composite decking, plastics, glass, some fiberglass, EIFS or vertical surfaces. Due to the gel form of this product vertical surfaces may sag and not adhere properly.

Test Patch: Always perform a small inconspicuous test area on each type of substrate and paint coating prior to full application. Testing before beginning any project is the best way to ensure product effectiveness. Test patches can determine the proper dwell time and thickness to apply the product for your specific application. Failure to do a test patch can result in need for more than one application, increasing labor and material costs.

Recommended Substrates: Before applying to an entire substrate always do a test patch. Recommended for use on wood, brick, concrete, cement, tile, terra cotta, metal, copper, aluminum, glass, limestone, brownstone, sandstone, granite, marble, slate, tin, stone, asphalt, most fiberglass and galvanized steel.

Regulatory Information: VOC compliance – Peel Away® 5 Soy Based Remover meets national, state and local regulations.

Preparation: Prepare surface by scraping or pressure washing to remove all loose or peeling coatings. Allow substrate to dry before applying Peel Away® 5 Soy Based Remover. Protect and cover all areas, vegetation and surfaces not designated to be stripped including adjoining surfaces where overspray may travel. Solvent resistant polyethylene sheets can be used as an effective barrier. Wet down all vegetation and cover with Dumond® Catch-N-Cover™ or 6 mil solvent resistant polyethylene sheets.

Surface and Air Temperatures: To avoid product from freezing and reducing effectiveness do not use below 35° degrees Fahrenheit. For best results, use product in temperatures above 50° degrees Fahrenheit and below 90° degrees Fahrenheit. Product effectiveness is increased in warmer temperatures.

Application & Spread Rate: Dumond® Chemicals always recommends working in smaller manageable areas when striping unless you are working with a large number of people, only strip what you can rinse before the remover dries, usually a 4’ X 4’ area. Using a brush or roller or squeege apply according to previous test patch results; apply at least 1/8”inch. For 24 hour dwell time ¼“inch is recommended. When applying onto irregular surfaces use a brush to paint into intricate areas. Product can dwell 1-24 hours if necessary. Peel Away® 5 Soy Based Remover provides an average spread rate of approximately 60-70 Sq. Ft. per gallon; results may vary based on substrate texture and porosity.

Spray Application: Dumond® Chemicals recommends that Peel Away® 5 Soy Based Remover be sprayed with an airless paint sprayer. The sprayer pump size should be at least ¾ gallon per minute and all gun and manifold filters should be removed prior to spraying. Hose size should be a new 1/4” ID however a 3/8” ID hose will reduce strain on the sprayer. It is always recommended to use a new hose on the job, as old paint in the lines will dislodge and cause clogs during application. Keep a clean bucket of water available, as an occasional flush of the pump may be necessary on hot days to alleviate clogs and the pumps inability to build up pressure. Do not leave Peel Away® 5 Soy Based Remover in the sprayer or spray lines overnight. Flush the sprayer and hose thoroughly each day and upon completion with warm water and dish detergent.

Removal & Clean Up: Remove by inserting trowel, spatula, squeegee or other paint scrapping tool underneath gel and scrap from the substrate. After all gel has been removed use a nylon brush and clean water to scrub residue off the substrate, paying particular attention to crevices, grooves, and cracks. Rinse thoroughly with water to remove all remaining residue. For optimal results, low pressure washing is recommended for final rinse when working outside. Remember, only strip what you can rinse before the remover dries, usually a 4’ X 4’ area. Dispose of gel remover and dissolved coatings according to federal, state and local regulations.

Best Practices:

Always test patch each type of surface and coatings for efficacy, dwell times, and thickness.

Never apply Peel Away® 5 Soy Based Remover and leave it for 24 hours without testing it first.

If product dries to surface reapply a thin coat over the hardened product and wait 30 minutes to 1 hour to reactivate the dried product.

Do not use if pregnant or around someone who is pregnant.

Not for use on vertical surfaces.

Health & Safety Requirements: Not for internal consumption. While Peel Away® 5 Soy Based Remover is formulated to be safe for the user, surface and environment, proper safety procedures should be followed at all times when handling this product. Read the full label and MSDS for precautionary instructions before use. 24-Hour Emergency Information: 1-800-535-5053 North America or 1-325-323-3500 International

Save over $69 now on our environmentally friendly paint remover package including Peel Away 7 1-Gallon and Smart Strip 1-Gallon for only $129.99 and you'll see great results! PEEL AWAY® 7 is an environmentally safe paint remover used to remove oil and latex paint. Works well when removing paint from wood to be kept it's natural color after stripping. Should be used in all situations where you are looking to keep the wood in its natural form.

Smart Strip™ by Peel Away® removes 15 LAYERS OF PAINT IN ONE SINGLE APPLICATION. It is a unique paint remover that is 100% biodegradable, safe for the user, the surfaces to be stripped and the environment. Smart Strip™ by Peel Away® is very effective for removing multiple layers of paint, industrial coatings and architectural finishes from virtually all interior and exterior surfaces. Works wonders on painted brick, all kinds of wood products, metals, stone, plaster, concrete, fiberglass and much more! Great for Acrylic Paint, Latex Paint, Lead Based Paint, Oil Based Paint, Shellac, Stains, Urethane and Water Based Paints. Order Now and Save!