A versatile, unique, environmentally safe paint remover. PEEL AWAY 7 is one of the best products for restoring wood to its natural look after being stripped of paint. Proven to remove most varieties of architectural varnishes and paints, high-performance coatings, acrylics, aluminum, mastics, chlorinated rubber, urethanes, automotive and marine finishes.
PEEL AWAY 7 is a solvent-based, non-toxic paint remover. Solvent-based paint removers are proven to be one of the most effective solutions available, regardless of the type of surface being treated. It is easy to work with and can be rolled, brushed or sprayed onto the surface being stripped.
Always test a small area on each surface before attempting a whole application. This will help you determine how much product to use, how long it takes to work and how to handle the product correctly.
Some key features of the PEEL AWAY 7 Solvent Based Paint Remover:
Multiple coats of lead-paint, high-performance paints or varnishes will be removed with one application
Specially formulated to be eco-friendly and safe with no flammable or toxic fumes
Safe for use on virtually all exterior and interior surfaces
Excellent coverage at approximately 40-50 square feet per gallon
No surface neutralization is required
PEEL AWAY 7 should always be used on jobs where you want to restore the wood in its natural form. The product is very effective at removing paints from wood and stripping it back to its original color.
For best results, always make sure surfaces are clean, clear of any debris and dry before applying PEEL AWAY 7. On most surfaces you should be able to scrape off the paint being removed, for stubborn areas use a nylon brush and second application.
This product is available in large amounts, and we offer discounts scaling upwards on larger purchases.
Product Description & Use: Peel Away® 7 Solvent Based Paint Remover is a solvent based paint remover used to remove most varieties of architectural paints and varnishes as well as some high-performance coatings such as epoxies, urethanes and marine coatings. Peel Away® 7 Solvent Based Paint Remover can be used on most interior and exterior surfaces and is excellent for intricate, carved or molded surfaces.
Features & Benefits:
Formulated without methylene chloride
No surface neutralization required
Non - Caustic
Will not raise the grain of wood
Will not darken hardwoods
Limitations: Not recommended for use on drywall, EIFS, plywood, plastics, vinyl, veneer, rubber, sheetrock, composite decking. Always do a test patch prior to full paint removal.
Test Patch: Always perform a small inconspicuous test area on each type of substrate and paint coating prior to full application. Testing before beginning any project is the best way to ensure product effectiveness. Test patches can determine the proper dwell time and thickness to apply the product for you specific application. Failure to do a test patch can result in need for more than one application, increasing labor and material costs.
Recommended Substrates: Before applying to an entire substrate always do a test patch. Recommended for use on wood, brick, concrete, cement, most fiberglass, tile, terra cotta, metal, copper, aluminum, glass, limestone, brownstone, sandstone, granite, marble, slate, tin, stone, asphalt, and galvanized steel.
Regulatory Information: Do not use if pregnant or attempting to get pregnant, meets all Federal, State and Local Government guidelines.
Preparation: Prepare surface by scraping or pressure washing to remove all loose or peeling coatings. Allow substrate to dry before applying Peel Away® 7 Solvent Based Paint Remover. Protect and cover all areas, vegetation and surfaces not designated to be stripped including adjoining surfaces where overspray may travel. Solvent resistant polyethylene sheets can be used as an effective barrier. Wet down all vegetation and cover with Dumond® Catch-N-Cover™ or 6 mil solvent resistant polyethylene sheets.
Surface and Air Temperatures: To avoid product from freezing and reducing effectiveness do not use below 35° degrees Fahrenheit. For best results, use product in temperatures above 50° degrees Fahrenheit and below 90° degrees Fahrenheit. Product effectiveness is increased in warmer temperatures.
Application & Spread Rate: Dumond® Chemicals always recommends working in smaller manageable areas when striping unless you are working with a large number of people, only strip what you can rinse before the remover dries, usually a 4’ X 4’ area. Using a trowel or putty knife apply paste at 1/8” inch thick according to test patch results. For 48 hour dwell time ¼” inch is recommended. When applying onto irregular surfaces use a nylon brush to force paste into intricate areas. Cover all paste with Dumond® Laminated Paper while being careful to smooth out all air pockets. Product can dwell 12-48 hours if necessary. Peel Away® 7 Solvent Based Paint Remover provides an average spread rate of approximately 40-50 Sq. Ft. per gallon; results may vary based on substrate texture and porosity.
Spray Application: Dumond® recommends that Peel Away® 7 Solvent Based Paint Remover be sprayed with an airless paint sprayer. The sprayer pump size should be at least ¾ gallon per minute and all gun and manifold filters should be removed prior to spraying. Hose size should be a new 1/4” ID, however a 3/8” ID hose will reduce strain on the sprayer. It is always recommended to use a new hose on the job, as old paint in the lines will dislodge and cause clogs during application. Keep a clean bucket of water available, as an occasional flush of the pump may be necessary on hot days to alleviate clogs and the pumps inability to build up pressure. Do not leave Peel Away® 7 Solvent Based Paint Remover in the sprayer or spray lines overnight. Flush the sprayer and hose thoroughly each day and upon completion with warm water and dish detergent.
Removal & Clean Up: Remove by inserting trowel, spatula, or other paint scrapping tool underneath paste and lift Dumond® Laminated Paper while scraping. After all paste has been removed use a nylon brush or Scotch™ Brite pad and clean water to scrub residue off the substrate, paying particular attention to crevices, grooves, and cracks. Rinse thoroughly with water to remove all remaining residue. For optimal results, low pressure washing is recommended for final rinse when working outside. Remember, only strip what you can rinse before the remover dries, usually a 4’ X 4’ area. Dispose of paper, paste remover and dissolved coatings according to federal, state and local regulations.
Waste Disposal: When lead-based paint coatings are being removed from a substrate, disposal of the resulting waste is regulated by the United States Environmental Protection Agency (EPA) and many state and local agencies. Federal standards for classification, handling and disposal of potentially hazardous wastes are detailed in EPA’s Resource Conservation and Recovery Act (RCRA) of 1976. Additional, more stringent regulations may be imposed by state and local regulatory authorities.
Always test patch each type of surface and coatings for efficacy, dwell times, and thickness.
Never apply Peel Away® 7 Solvent Based Paint Remover and leave it for 24- 48 hours without checking on it
If product dries or hardens to the surface, remove the Dumond® Laminated Paper and apply a thin coat of Peel Away® 7 Solvent Based Paint Remover over hardened area, reapply Dumond® Laminated Paper and wait 30 minutes to 1 hour and remove
Use butchers paper or freezer paper as a substitute for Dumond® Laminated Paper
Do not use if you are pregnant or use around someone who is pregnant
Health & Safety Requirements: Not for internal consumption. While Peel Away® 7 Solvent Based Paint Remover is formulated to be safe for the user, surface and environment, proper safety procedures should be followed at all times when handling this product. Read the full label and MSDS for precautionary instructions before use.